JCB220 416E 430E Backhoe Loader Compressor 299 - 2212 Air Conditioning Parts

Specification

Description

1. When the air conditioning system is turned on, the accumulator or filter drier should be replaced frequently. Buyer must show proof of receiver/dryer replacement for warranty purposes. In some vehicles, the dryer is attached to the condenser and must be replaced as well
2. The air conditioning system must be clean and free of debris and contamination. In most cases, the components can be flushed; however, in some cases, the condenser or other components may need to be replaced.
3. The orifice tube must be replaced; if the expansion valve is dirty or defective, it must be inspected and replaced.
4. The correct amount and type of oil must be used. Consult the OE manufacturer for this information.
5. A vacuum must be drawn for at least 45 minutes before charging the refrigerant. In humid climates or cool days, this time should be increased to effectively remove air and evaporate moisture.
6. The orifice tube (if equipped) should always be replaced, and the expansion valve (if equipped), if not replaced, should at least be checked for proper operation

Parts Of The Air Conditioning System

1. Compressor: Compress the refrigerant from a low-pressure gas state to a high-pressure gas state.
2. Condenser: Cools the high-pressure gaseous refrigerant from the compressor into a high-pressure liquid.
3. Liquid storage tank: also called desiccant bottle, with desiccant inside, which absorbs the water in the system and stores the refrigerant.
4. Expansion valve: atomize the high-pressure liquid refrigerant into a low-pressure liquid state.
5. Evaporator: also called evaporator, the refrigerant absorbs heat from low-pressure liquid to gaseous state.
6. Blower: Blows the cold air absorbed by the evaporator to the ventilation duct.

Guangzhou Junhui Machinery Co., Ltd. is mainly engaged in the production and sales of various types of excavators, construction machinery main parts and hydraulic excavator seals, engine parts, hydraulic parts, air conditioning parts, chassis parts and wearing parts at home and abroad. The company has modern management, strong technical force, excellent service quality and wide sales range. Suitable for Komatsu, , Hitachi, Sumitomo, Kato, Daewoo, Hyundai, Kobelco, , Sany and other models.

Our Products Are As Follows

SEAL KIT: Boom Cylinder Seal Kit, Arm Cylinder Seal Kit, Bucket Cylinder Seal Kit, Control Valve Seal Kit, Main Pump Seal Kit, Travel Motor Seal Kit, Swing Motor Seal Kit, Rotary Center Joint Seal Kit, Regulator Seal Kit

Consumable Parts: Diamond Bucket Teeth, Welding Adapter

Engine parts: cylinder liner kits, valves, engine seal kits, crankshaft bushes, connecting rod bushes, crankshafts, camshafts, connecting rods, starter motors, alternators, high-pressure oil pumps, throttle motors, etc.
Hydraulic parts: main pump, travel motor, swing motor assembly and parts.

Air conditioning accessories: compressors, condensers, evaporators, expansion valves, dryers, control panels, filters, pipes, etc.
Chassis parts: track rollers, front idlers, sprockets, track shoes, track chains, etc.