EC360B Excavator Compressor VOE14659238 Air Conditioning Parts

Specification

Application Model

A25G A30G A35F / G A35F / G FS A35G A40F / G A40F / G FS A40G A45G A45G FS A60H EC250D EC250E EC300D EC300E EC330B EC350D EC350E EC360B EC380D EC380DHR EC380E EC380EHR EC480D EC480DHR EC480E EC480EHR EC700C EC700CHR EC750D EC750E EC950E G900C PL3005D PL3005E PL4608 PL4809D PL4809E .Heavy

Installation Notes

1. Before installing, Be sure to clean the air-conditioning system repeatedly, remove the a/c hose, pour it into the hose,condenser, evaporator with detergent, and soak for about 20 minutes until the detergent is clear.
2. It must change new receiver drier.
3. It must clean expansion valve or change new one.
4. Clean condenser and evaporator core.
5. Check radiating fan if working and the temperature cannot be too high.
6. Install new compressor, refill with genuine R134a refrigerant.

About Compressors

Rotary vane compressors consist of a rotor with three or four vanes and a carefully shaped rotor housing. As the compressor shaft rotates, the vanes and housing form chambers.
The R134a is drawn through the suction port into these chambers, which become smaller as the rotor turns. The discharge port is located at the point where the gas is fully compressed.
The vanes are sealed against the rotor housing by centrifugal force and lubricating oil.
The oil sump and oil pump are located on the discharge side, so that the high pressure forces oil through the oil pump and then onto the base of the vanes keeping them sealed against the rotor housing.
During idle an occasional vane noise from the compressor may be heard. This is due to the time taken for lubricating oil to circulate through the A/C system.

Guangzhou Junhui Machinery Co., Ltd. is mainly engaged in the production and sales of various types of excavators, construction machinery main parts and hydraulic excavator seals, engine parts, hydraulic parts, air conditioning parts, chassis parts and wearing parts at home and abroad. The company has modern management, strong technical force, excellent service quality and wide sales range. Suitable for Komatsu, , Hitachi, Sumitomo, Kato, Daewoo, Hyundai, Kobelco, , Sany and other models.

Our Products Are As Follows

SEAL KIT: Boom Cylinder Seal Kit, Arm Cylinder Seal Kit, Bucket Cylinder Seal Kit, Control Valve Seal Kit, Main Pump Seal Kit, Travel Motor Seal Kit, Swing Motor Seal Kit, Rotary Center Joint Seal Kit, Regulator Seal Kit

Consumable Parts: Diamond Bucket Teeth, Welding Adapter

Engine parts: cylinder liner kits, valves, engine seal kits, crankshaft bushes, connecting rod bushes, crankshafts, camshafts, connecting rods, starter motors, alternators, high-pressure oil pumps, throttle motors, etc.
Hydraulic parts: main pump, travel motor, swing motor assembly and parts.

Air conditioning accessories: compressors, condensers, evaporators, expansion valves, dryers, control panels, filters, pipes, etc.
Chassis parts: track rollers, front idlers, sprockets, track shoes, track chains, etc.